350W 12V 29A S-350-12 AC/DC 12v switch power supply 12v for 3D printer kit
Suitable for CCTV, Radio, Computer project
Manual Switch between 110V and 240V Input
+ / - 10% adjustable output voltage
Auto on/off cooling fan
High Efficiency, Low Temperature
Built-in EMI Filter
100% full load burn-in test
Short Circuit,Over Load,Over Voltage and Over temp Protection
Auto-recovery after protection
Size : 215 x 115 x 50 mm
DC Output Voltage: 12VDC;
Output Voltage Tolerance: ±1%;
Output Current: 29A;
Output Current Range: 0-29A;
Output Power: 348W;
Ripple And Noise: 150mVp-p;
Input Voltage range: 90-132VAC/180-264VAC by switch 254~370VDC
Input Frequency range: 47-63HZ
Protection Overload: 105-135% rated output power
Protection Over Ovltage : 13.8-16.2V
Working temp.,humidity : -10-+60℃(Refer to output load derating curve)
Working humidity : 20~90% RH non-condersing
Storage temp.,humidity : -20-+85℃,10~95% RH
Vibration : 10-500HZ,2G 10 min./1cycle,60min.each along X,Y,Z axes
1.All paramaters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHZ of bandwidth by using a 12' twisted pair-wire terminated with a 0.1uf & 47uf peralel capacitor.
3.Tolerance:indudes set up tolerance,line regulation and load regulation.
1 x S-350-12 12V DC power supply box
1 x 120cm cable connected to ATX port
1 x 210cm power supply cable with switch
1. Convenient & Friendly Customer Service.
2. Low Prices Direct From Factory Suppliers.3. Fast Delivery Around the World. 4. High Quality With Global Standards. 5. 1 Year Factory Warranty.6. Safe Shipping Way and Payment.
Welcome ODM/OEM orders, we are professional to improve, design, process,
manufacture products according to your requirement !